How to Remove a Glass Cooktop
Cast iron skillets and ceramic cookware can scratch or break a glass cooktop. the great news is you do not need to replace your entire stove. We share easy steps on the way to remove and replace a glass cooktop.
Order a Replacement Part
Before you begin, you ought to have a replacement cooktop. Many stoves and ranges have a model number and serial number on the rear or inside the appliance. you'll order replacement parts online and have them delivered to your house.
Unplug the Stove
Unplug the stove from the wall, and gently slide the stove out into the kitchen far away from the countertop, so you'll work more easily. After ensuring there's no power getting to the stove, open the oven door.
Remove the Screws
There should be two Phillips-head screws holding the cooktop to the stove frame. Use a Phillips-head screwdriver to get rid of them. Set the screws aside so you'll reinstall them later.
Lift Up the Cooktop
The cooktop should be freely resting on the stove frame and will easily pull up from the frame. Gently lift abreast of the edges of the cooktop.
Remove the Burners + Cooktop
You’ll notice either the burners are attached to the stove frame or the burners are attached to the cooktop with wires leading into the stove frame. If the burners are attached to the stove frame, simply take off the cooktop and set it aside. Clean the world employing a vacuum if there's any debris. If the burners are attached to the cooktop, use a sturdy prop to carry the front of the cooktop far away from the stove frame. Next, unscrew the burners from the cooktop brackets, ensuring to not drop the burners or pull them far away from the stove frame. Gently rest the burner on top of the insulated area of the stove frame. Once you’ve removed both sets of burners, lift the cooktop far away from the stove frame. Keep any screws you've got removed. Note: If the cooktop is broken, there could also be sharp pieces of glass or ceramic within the work area. make certain to wear gloves so you don’t cut yourself.
Slide On the New Cooktop
Slide the rear of the cooktop into the stove frame. There should be noticeable notches where the cooktop rests on the frame (You pulled the cooktop off these notches once you detached it from the frame).
If the new cooktop doesn’t have the brackets for attaching the burners, remove the brackets from the old cooktop employing a screwdriver. Screw them onto the new cooktop. Now, you're able to attach the burners to the new cooktop. Insert the rear of the cooktop into the stove frame. Support the front of the cooktop with a sturdy prop. Lift the rear burners first, and fasten them to the new cooktop using the screws you far away from the old one. confirm to not detach any wires. Do an equivalent thing with the front burners. Remove the prop, and gently set the cooktop onto the stove frame.
Secure the New Cooktop
Open the oven door, and screw the cooktop to the frame using the 2 screws you put aside. Finally, move the stove back to place, and plug it in. you're able to revisit to cooking.
If you Cooking Range Gas Stove damage due to any reason, at urban repairing you can book your cooking range repair service Pune, our technicians come with 45 minutes at your doorstep and repair you cooktop at very reasonable rates.
0 Comments