Important points to keep in mind while geyser installation

Important points to keep in mind while geyser installation

Important points to keep in mind while geyser installation


Electric geyser is an important and widely used household appliance. Correct installation of the geyser is extremely important to make sure effective operation and user safety. Geyser installation should be done as per manufacturers' guidelines. it's advisable to call a qualified electrician or plumber for installation.

Points to require care while geyser installation:

Sufficient space

Ensure that there's sufficient space available for the geyser unit. the world or space must be in accordance with the dimensions of the electrical geyser. Always consider the geyser size before installing it within the bathroom or kitchen. Adequate space helps in the proper cleaning and servicing of geyser units.

Correct height from the bottom 

The Geyser unit must be installed at the correct height from the bottom. A minimum height of 1.8 meters from the ground is suggested for geyser installation. to make sure safety, geysers should be fitted far away from wet and damp areas like bathtubs and shower areas.

Firm wall structure

For correct and firm installation of geyser, it's vital to organize the wall suitably. Firstly, a plate or frame is fixed on the wall then a geyser is installed on the plate. just in case of solid walls hole must be properly drilled and in line to repair the plate. Special care must be taken just in case of a hollow brick wall. For hollow brick walls, obtain sufficient space and fill the dug-up space with concrete cement. When the cement dries and sets firmly, drill holes for fixing the plate and later install your geyser. In both cases, fix the plate firmly with bolts so as to hold a load of geyser unit ( with water) safely.

Unblocked water pipes 

Before geyser installation gets your water pipes checked for any blockage. confirm that the pipes are clean and clog-free for smooth water flow.

Safe electrical connections

When making the electrical connections for geyser, always confirm that the electrical supply has the right overload fuse or MCB protection. For more knowledge on fuse and MCB refer to “6 advantage of MCB over fuse”. Also, confirm that the hot-water heater or geyser and electrical supply are properly grounded.

For Gas Geyser Repair Services in Pune or gas geyser installation in Pune for not heating water, Call to book @ Urbanrepairing. in


Post a Comment

0 Comments